|
 |
|
Surge & Lightning Protection
|
Complete Surge Protection Solutions
|
 |
|
PROBLOC BSR 50/275 (3+1)
|
|
The PROBLOC BS(R) 50 (3+1) series of over voltage surge protective devices has been developed to protect against
partial direct and indirect lightning discharges and is intended to provide protection in zones 0A - 1 as per IEC 62305.
Category IEC / EN / VDE: Class I / Type 1 / B+C
Use for Main distribution boards
High energy MOV and GDT
Iimp = 12.5kA / pole, Imax = 50kA / pole
Mechanical flag + remote contacts (R)
|
|
|
|
|
|
Protec CMR 80/275 (2+0)
|
|
The PROTEC CM(R) 80 (2+0) series of low cost, over voltage surge protective devices has been developed to protect
against indirect lightning discharges and is intended to provide protection in zones 1 - 2 as per IEC 62305.
Category IEC / EN / VDE: Class II / Type 2 / C
Use for Branch sub-distribution boards
MOV protective element
In = 15kA , Imax = 40kA
Mechanical flag + remote contacts (R)
|
|
|
|
|
|
|
Protec CMR 80/275 (1+1)
|
|
The PROTEC CM(R) 80 (1+1) series of low cost, over voltage surge protective devices has been developed to protect
against indirect lightning discharges and are intended to provide protection in zones 1 - 2 as per IEC 62305.
Category IEC / EN / VDE: Class II / Type 2 / C
Use for Branch sub-distribution boards
MOV and GDT element
In = 15kA , Imax = 40kA
Mechanical flag + remote contacts (R)
|
|
|
|
|
|
NMH2-TC (2 Signal Protector)
|
|
The NMH2-TC series that can provide protection to two independent of low voltage protective devices has been developed to
protect against the effects of induced voltages onto data, signal and communication circuits.
Use for 2-pair SPD
RS485, CAN, RS232, 4-20 mA, D/I, D/O, leased line 3 stage protector
Coarse and Fine Protection
In = 10kA , Imax = 20kA
|
|
|
|
|
|
IMH-TC (Signal Protector)
|
|
The IMH-TC series of low voltage protective devices has been developed to protect against the effects of induced voltages
onto data, signal and communication circuits.
RS485, CAN, RS232, 4-20 mA, D/I, D/O, leased line 3 stage protector
Use for Single-pair SPD
Coarse and Fine Protection
In = 10kA , Imax = 20kA
|
|
|
|
|
|
VM-DC (Supply Line Protector)
|
|
The VM-DC series has been developed to protect DC power supplies.
Nominal Operating Voltage: 12VDC / 24 VDC
Use for SPD for DC Power Supplies
Coarse and Fine Protection
In = 10kA , Imax = 20kA
|
|
|
|
|
|
LZ-NET (RJ-45 LAN Protector)
|
|
The LZ-NET series is intended to protect Local AreaNetworks (LAN) from over voltage surges and electrostatic
discharges created by switching transients in buildings.
LAN Protector (1 way)
Compact, Ergonomic Packaging
Termination: RJ45, Cat. 5 Connectors
In: 300 A 8/20 per line
|
|
|
|
|
|
ZV-BNC (Coaxial Video Surge Protector)
|
|
The ZV-BNC series is intended to protect Arcnet computer networks and CCTV coaxial video signals.
Coaxial BNC Protector
For CCTV and Arcnet
Indirect Shield Earthing
In = 10kA, IL = 100mA
|
|
|
|
|
|
|
|
|
|
