The new EasyConnect connectors feature quick-connect technology, making the stripping of bus conductors superfluous.
The bus connectors are used to connect a PROFIBUS nodeto the PROFIBUS line. The connector is quick to install, and
has a metallized housing and integrated terminating resistors.
The Systeme Helmholz GmbH offers the new EasyConnect connector with a perpendicular cable outlet.
Correct connection of the PROFIBUS cable can quickly be checked visually even after installation.
The new PROFIBUS compact repeater from Systeme Helmholz GmbH can be used flexibly due to its very compact size.
The repeater enables transmission rates of 9.6 Kbps to 12 Mbps.
The transmission signals are regenerated by the repeater and retransmitted.
A real alternative to conventional PROFIBUS repeaters
No additional space needed in the cabinet
Very flexible in its use
Can be used as a bus extension or spur line
increases the number of nodes
system expansion
can also be used in MPI networks
status LEDs
5 V power supply direct from the PROFIBUS, with that it`s usuable on every PROFIBUS device
The NETLink PRO Ethernet Gateway offers you flexible options for programming via Ethernet, tele teleservice and visualization.
Up to 12 connections can be established at the PROFIBUS end, while up to 6 connections can be established at the TCP end.
MPI/PROFIBUS up to 12 Mbps, autobaud
12 connections on MPI/PROFIBUS
6 connections on TCP
Power supply from the CPU
External 24 V supply possible
Support of the PPI protocol for S7-200 applications
Security functions for protecting TCP/IP access
Diagnostic functions for deriving accessible nodes and bus parameters
Support of DP-V1 services, including those for the Process Device Manager (PDM) of Siemens
Now also available with 35 degree connector for the S7-400
The SSW5/LAN is an S5 Ethernet converter suitablefor programming S5 controllers via the Ethernet. The power is drawn
from the CPU or from an exterexternal source (24 V). A virtual COM port is available for all common installation tools.
S5 programming via TCP/IP
Virtual COM port for all common installation tools
The DP/DP coupler interlinks two PROFIBUS DP networks and permits data transmission between the masters and
the two DP networks. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data.
The DP/DP coupler is configured in the S7 software or by means of a GSD file.
Up to 244 bytes of input data and 244 bytes of output data can be exchanged between two PROFIBUS networks
Dual redundant power supply
Electrical isolation between the PROFIBUS networks
PROFIBUS addresses can be set by DIL switch or software
The 40-way front connector with screw-type terminals supplied by Systeme Helmholz GmbH features field-proven
screw technology. The front connector permits the simple connection of sensors and actuators to input/output
modules of Systeme Helmholz GmbH or other manufacturers.
This means that rewiring is not necessary when a module is replaced.
